SMS PARS SGH TUBULAR VIBRATORY HAMMER models comes with with standart fixed tubular piling side gripping arms - the same side grip tubular pile driver can be used to handle a different range dimensions of Tubes with it’s clamps.
Tubular piling clamps can be produced as per dimensions of tubes requested to drive.
Side grip PARS SGH TUBULAR VIBRATORY HAMMER Series enable tubular piles to be lifted from the ground, pitched and driven without the need for a crane, piling gates or in some cases a banksman.This piling system is far more cost effective than the traditional methods.
ADVANTAGES :
- Driving and extracting tubes in different dimensions only
- Excavator mounted
- Works in limited spaces
- Can be rotated vertically and horizontally
- 360° unlimited movement
- 30° tilting to both sides
- Heavy Duty quality
- Rigid
- Reliable technology
- SMS Control system with display - you can monitor the piling work from inside excavator’s cab and you can control the angles during piling operation.
PARS SGH 30
| Eccentric Moment (Kgm) | 3 | Centrifugal Force (kN) | 310 |
| Speed (d/d) | 3000 | Max. Pulling Force (kN) | 60 |
| Max. Pushing Force (kN) | 40 | Total Weight (kg) | 1650 |
| Total Length (mm) | 1280 | Total Width (mm) | 1100 |
| Total Height (mm) | 2300 | Flow (Lt/min) | 120 |
| Working Pressure (bar) | 300 | Power (kW) | 165 |
| Hydromotor | F12-40 | Oil Pump | + |
| Number of Cylinders | 3 | Rotation-Swing Angles(°) | 360-30 |
| Suitable Excavator class | 14-20 Tons | Tubular Pile , Tubes | 80 mm - 325 mm 4/6/8 meter length Max 800 kg |
PARS SGH 40
| Eccentric Moment (Kgm) | 4 | Centrifugal Force (kN) | 370 |
| Speed (d/d) | 2800 | Max. Pulling Force (kN) | 120 |
| Max. Pushing Force (kN) | 80 | Total Weight (kg) | 1850 |
| Total Length (mm) | 1200 | Total Width (mm) | 1100 |
| Total Height (mm) | 2250 | Flow (Lt/min) | 170 |
| Working Pressure (bar) | 300 | Power (kW) | 85,0 |
| Hydromotor | F12-30 x 2 pieces | Oil Pump | + |
| Number of Cylinders | 3 | Rotation-Swing Angles(°) | 360-30 |
| Suitable Excavator Class | 20 -28 tons | Tubular Piles | 150 mm- 400 mm 6 / 8 / 10 meter length Max 1200 kg |
PARS SGH 60
| Eccentric Moment (Kgm) | 6 | Centrifugal Force (kN) | 450 |
| Speed (d/d) | 2500 | Max. Pulling Force (kN) | 120 |
| Max. Pushing Force (kN) | 80 | Total Weight (kg) | 2750 |
| Total Length (mm) | 1200 | Total Width (mm) | 1300 |
| Total Height (mm) | 2350 | Flow (Lt/min) | 204 |
| Working Pressure (bar) | 300 | Power (kW) | 120 |
| Hydromotor | F12-40 x 2 pieces | Oil Pump | + |
| Number of Cylinders | 3 | Rotation-Swing Angles(°) | 360-30 |
| Suitable Excavator class | 28-32 Tons | Tubular Pile , Tubes | 150 mm to 762 mm 8/10/12 meter length Max 2300 kg |
PARS SGH 80
| Eccentric Moment (Kgm) | 8 | Centrifugal Force (kN) | 604 |
| Maximum Amplitude (mm) | 14,5 | Speed (d/d) | 2500 |
| Maximum Pulling Force (kN) | 175 | Maximum Pushing Force (kN) | 90 |
| Dynamic Weight (kg) | 3500 | Weight (kg) | 3200 |
| Total Length (mm) | 1230 | Total Width (mm) | 2560 |
| Total Height (mm) | 1422 | Flow (Lt/min) | 240 |
| Working Pressure (bar) | 300 | Power (kW) | 165 |
| Hydromotor | F12-40 | Oil Pump | + |
| Number of Cylinders | 3 | Rotation-Swing Angles (°) | 360-30 |
| Suitable Excavator Class | 32 Tons and Over | Tubular Pile, Tubes | 150 mm to 762 mm 12/ 16 meter length Max 2850 kg |
Gallery
Standart Series Clamp
